Chapter 3 Replacement Procedure; Work Flow - Pro-face GP4000M Series Installation/Replacement Manual

Chapter 3 Replacement Procedure

3.1 Work Flow

Installation
Check the compatibility of
hardware in Chapter 2.
Remove GP-37W2.
Process the panel and
install GP-4301TM.
Screen
Check the differences of
specifications in the booklet
[Compatibility of Software]
on OtasukePro!
(http://www.pro-face.com/
otasuke/qa/gp3000/replace
/soft/conv/care/3/)
Receive the screen data
from GP-37W2. *1
Convert the data with
GP-Pro EX's Project
Converter
Check and modify the data
in GP-Pro EX.
Transfer the screen data to
GP-4301TM.
11/46
Communication
Check the connection
between GP-4301TM and
PLC in the GP-Pro EX
Device/PLC Connection
Manual.
Connect GP-4301TM and
PLC with a cable.