Introduction; N2200 Series Overview - Dell EMC Networking N Series Getting Started Manual

Introduction

This document provides basic information about the Dell
Networking N2200 Series switches, including how to install a switch and
perform the initial configuration. For information about how to configure and
monitor switch features, see the User's Configuration Guide, which is
available on the Dell Support website at dell.com/support/manuals, for the
latest updates on documentation and firmware.
This document contains the following sections:
•

N2200 Series Overview

• N2200 Series Hardware Overview
• N2200 Installation
• Starting and Configuring the N2200 Switch
NOTE:
Switch administrators are strongly advised to maintain Dell EMC
Networking switches on the latest version of the Dell EMC Networking Operating
System (DNOS). Dell EMC Networking continually improves the features and
functions of DNOS based on feedback from you, the customer. For critical
infrastructure, prestaging of the new release into a noncritical portion of the
network is recommended to verify network configuration and operation with the
new DNOS version.
N2200 Series Overview
The Dell EMC Networking N2200-ON switches are stackable Layer 2/3 1
Gigabit stackable Ethernet switches and include the following models:
• Dell EMC Networking N2200X-ON
• Dell EMC Networking N2224PX-ON
• Dell EMC Networking N2224X-ON
• Dell EMC Networking N2248PX-ON
• Dell EMC Networking N2248X-ON
®
EMC™
3