Typical Printer Configuration - Simplex 4100ES-S1 Programming Manual

Document: LT0400
Click the Port Data... button and select the
desired Device Type as in the following
example for an 80 column CRT output.
Click OK and again for the previous screen.
Repeat for Port B (if used) and select the
appropriate device type and baud rate, etc.
Note: Only Port A can be used for modems
or 2120 interface. Either Port can be used
for printers or terminals
8.8.1

Typical Printer Configuration:

Depending on the printer, the usual settings are:
Device type PRT80U
Baud rate 9600
Parity None
Data bits 8
Stop bits 1
4100ES-S1
4100E
S-S1
Printer Cable Connections
8-13
4100ES-S1 Programming Guide
Adding Expansion Modules
Printer