Attaching The Focal Lens To The Scan Head; Figure 2-15: Example Of F-Theta Lens (Complete Assembly) - Aerotech AGV-HP Series Hardware Manual

AGV-HP(O) Hardware Manual

2.4. Attaching the Focal Lens to the Scan Head

The procedure outlined in this section is provided as a general reference for installing and removing focal
lenses (F-Theta lenses). A lens adapter is required to attach the focal lens to the AGV-HP(O) series scan
head. This lens adapter is supplied with optics configurations that include a focal lens. For AGV-HP(O) scan
heads that are provided without a focal lens, the user is responsible for supplying both the F-Theta lens and
the necessary lens adapter. Contact the factory for assistance with the design of an appropriate lens adapter
if necessary.
W A R N I N G : Before performing any inspections of the focal lens, verify that the laser is
switched off and secured against accidentally being switched on.
W A R N I N G : Fingerprints contain aggressive substances that can damage optical surfaces.
Always wear suitable gloves when you handle the optics.
www.aerotech.com
Figure 2-15: Example of F-Theta Lens (Complete Assembly)
2.4. Attaching the Focal Lens to the Scan Head
39