Attaching The Focal Lens To The Scan Head; Figure 2-2: Example Of F-Theta Lens (Complete Assembly) - Aerotech AGV-SPO Series Hardware Manual

2.4. Attaching the Focal Lens to the Scan Head

2.4. Attaching the Focal Lens to the Scan Head
IMPORTANT: Wear clean, powder-free gloves when you handle optical components.
The procedure outlined in this section is provided as a general reference for how to remove or install
a focal lenses (F-Theta lenses). A lens adapter is required to attach the focal lens to the AGV-SPO
series scan head. This lens adapter is supplied with optics configurations that include a focal lens.
For AGV-SPO scan heads that are provided without a focal lens, the user is responsible for supplying
both the F-Theta lens and the necessary lens adapter. Contact the factory for assistance with the
design of an appropriate lens adapter if necessary.
Figure 2-2: Example of F-Theta Lens (Complete Assembly)
DANGER: Make sure that the laser is set in the "off" position and secured against
accidental operation before you inspect or do maintenance to the focal lens.
26
AGV-SPO Hardware Manual
www.aerotech.com