Festo FEC Compact Brief Description page 32

8. If you are using the Multiprog software:
8.1. Create a new project using the template for the
8.2. Save the project under a meaningful name.
8.3. Download the project to the controller (does not
8.4. Start the controller. If you now apply a signal at
All further information can be found in the manual for the
IPC FEC Compact (P.BE-FEC-C-SYS ....) or on the product
CD (part no. 189530).
32
IPC FEC FC30.
have to be programmed). If you are not using
COM1 on your programming PC, then you must
first switch to the COM port that you are using.
the input, the output with the same address must
switch to "1".
Festo KBS-FEC FC30- 0206NH English