6.
Configure the port settings and click [OK].
If you selected [TCP/IP (LAN)]
Note:
You cannot set the same name as an existing port name.
The computer cannot communicate with the destination printer if the [Printer Name or IP Address] and
[Port Number] settings do not match those of the printer.
Click [OK] to check communications using the configured settings. If communications failed, the
following screen appears.
[Cancel]
Returns to the previous screen. Click this button to change [Printer Name or IP Address] or any
other settings.
[Try Again]
Checks communications again.
[Continue]
Does not check communications and proceeds to the next step. Click this button when you want
to continue with the port setup without checking communications with the printer.
Normally, you do not need to change [Port Number] (the default value on the printer is also 9100).
Normally, you do not need to change the timeout settings.
The [Advanced TCP/IP Port Configuration] dialog box can be displayed even after installing the printer
driver with the following procedure:
a.
Open [Devices and Printers], right-click the desired printer, and select [Printer properties].
b.
Click the [Ports] tab.
c.
Click [Configure Port].
31