Part Identification Chart - Weider WEBE09200 User Manual

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M10 Washer (30)
10mm Spacer (38)
M8 x 58mm Bolt (37)
M10 x 58mm Carriage Bolt (34)
M10 x 65mm Bolt (33)
M10 x 68mm Bolt (40)
M8 Washer (29)
M6 Washer (36)
M8 Nylon Locknut (28)
M10 Nylon Locknut (27)
M6 x 16mm Screw (32)
M6 x 38mm Screw (35)
5