Table of Contents
Advertisement
SRM-6 Operation & Diagnostics
Interface Status Screen
At the SRM-6 Main Menu, press 4 to select the Interface Status screen.
read-only status display and special considerations.
Table 3-8
Interface Status Screen
Selection
Aggregate Interface Status
Channel Interface Status
[0] Return to Main Menu
Special Considerations
The Interface Status screen will always show the status of all interface signals, regardless of alarm
masks configured by the user.
This screen will refresh with updated status information every two seconds. When you type 0 and
press Enter to return to the Main Menu, the system will process that command at the end of the
refresh interval.
3-10
CTS (Select ON or OFF); Reflects aggregate control leads.
DSR (Select ON or OFF); Reflects aggregate control leads.
DCD (Select ON or OFF); Reflects aggregate control leads.
RTS (Select ON or OFF); Reflects channel control leads.
Remote CTS (Select ON or OFF); Reflects remote channel control
leads.
Exits the Interface Status screen and returns to the SRM-6 Main Menu.
SC SRM-6 Multiplexer
Installation & Operation Manual
Interface Status Screen
Table 3-8
describes the
Description
076R176-000
Issue 1
Advertisement
Table of Contents
