Table of Contents
Advertisement
SRM-6 Operation & Diagnostics
Firmware Download Menu
At the SRM-6 Maintenance screen, press 3 and then press Enter to access the Firmware
Download submenu, shown below.
following the table.
Table 3-10
Firmware Download Menu
Display / Selection
Active Firmware Status
Standby Firmware Status
Status Display
Operating Firmware
Download Mode
[1] Disable All Downloads
[2] Enable Downloads and
Store Zipped
[3] Enable Downloads, Unzip
and Execute
[CR] Return to Previous Menu Returns to the SRM-6 Maintenance screen.
[0] Return to Main Menu
3-12
Table 3-10
SRM-6 Firmware Download Submenu
Active Firmware Status
Standby Firmware Status
Operating Firmware
Download Mode
[1] Disable All Downloads
[2] Enable Downloads and Store Zipped
[3] Enable Downloads, Unzip and Execute
[CR] Return to Previous Menu
[0]
Return to Main Menu
Select: [ ]
Read-only display of revision and status of the stored, zipped Active
firmware.
Read-only display of revision and status of the stored, zipped Standby
firmware.
Invalid -
(applies to Standby Status only).
Invalid-Unzip Failed
stored, zipped firmware.
Valid - OK
Indicates which stored revision of firmware has been unzipped and is
currently operating in the SRM-6.
Read-only display of the unit's response to an imminent firmware download.
This Enable/Disable setting remains in effect until changed by the user.
Commands the unit to reject any imminent download of firmware.
Commands the unit to accept an imminent firmware download and then
store it as the zipped, Active firmware.
Commands the unit to accept an imminent firmware download, store it as
Active firmware, unzip it, and then place it into operation as Active.
Returns to the SRM-6 Main Menu.
SC SRM-6 Multiplexer
Installation & Operation Manual
SRM-6 Maintenance Screen
describes the menu selections, with procedures
: T3.00.00 VALID - OK
: N0.00.11 VALID - OK
: T3.00.00
: DISABLE ALL DOWNLOADS
Description
[ blank ] indicates new unit with no stored, zipped firmware
indicates problem occurred during unzip of
indicates stored firmware is valid and ready for use.
076R176-000
Issue 1
Advertisement
Table of Contents
