Table of Contents
Advertisement
SRM-6 Operation & Diagnostics
SRM-6 Diagnostics
At the SRM-6 Main Menu, press 2 and then press Enter to access the SRM-6 Diagnostics
screen. The Aggregate Loopback test, activated/terminated from this screen, loops aggregate
transmit data from the DTE to receive data to the DTE.
Table 3-6
and the associated illustration describes the menu selections.
Figure 3-1
shows the aggregate loopback data path.
Table 3-6
Diagnostics
Selection
[1] Aggregate Loopback
[S] Save
[0] Return to Main Menu
Special Considerations
For this loopback, a timing source is required which can be supplied by DTE (TT) timing, or by a
device connected to the aggregate DTE port for ST timing.
076R176-000
Issue 1
SRM-6 Diagnostics
[1] Aggregate Loopback
No Test in Progress
[S] Save Selection
[0] Return to Main Menu
Select: [ ]
Sets the unit to Activate the aggregate loopback test, or
Terminates a test in progress. Data is sent back to the connected
DTE.
Saves the setting to the unit and either activates the aggregate
loopback test, or terminates a test in progress.
Exits the Diagnostics menu and returns to the SRM-6 Main Menu.
SC SRM-6 Multiplexer
Installation & Operation Manual
SRM-6 Diagnostics
: Terminate
Description
3-7
Advertisement
Table of Contents
