Procedure 3. Measure Aortic Diameter Manually (Optional) - Verathon AORTASCAN AMI 9700 Operation & Maintenance Manual

PROCEdURE 3.
To measure abdominal aortic diameter manually, you must perform a scan in B‑mode. For information about
setting the instrument in B‑mode, see
1. After completing the scan, press the Manual Mode button
screen opens.
2. By using the following button controls, move one cursor to the right edge of the aorta and move the
other cursor to the opposite edge of the aorta:
• Press the Axis Select button
arrows.
• Use the Manual Mode button
• When you are finished moving the cursors, press the Return button
This records the measurement and exits Manual Measurement Mode. The manual measurement is
displayed on the Review screen. Record a voice annotation in order to save the manual measurement
result.
Operations & Maintenance Manual: Using the Device
MEASURE AORTIC dIAMETER MANUALLY (OPTIONAL)
General Preferences Screen
Axis Select Manual Mode Return
to swap between the Up and Down arrows or the Left and Right
in order to swap between cursors on the results display.
on page 26.
. The Manual Measurement Mode
.
49