Seat ALHAMBRA Owner's Manual page 69

Menu Function
When the ignition is switched on, the average con-
Average fuel con-
sumption sumption (in l/100 km or in mpg) is displayed after
the vehicle has moved approximately 100 metres
(328 feet). Otherwise horizontal lines are displayed.
The value shown is updated approximately every 5
seconds.
Approximate distance in km (or miles) that can still
Distance to empty
be travelled with the fuel remaining in the tank, as-
suming the same style of driving is maintained. This
is calculated using the current fuel consumption.
Distance travelled, after ignition is switched on, in
Distance covered
km (or miles).
Average speed After the ignition is switched on, the average speed
will be shown after a distance of approximately 100
metres (328 feet) has been travelled. Otherwise hori-
zontal lines are displayed. The value shown is upda-
ted approximately every 5 seconds.
Digital display of Current speed displayed digitally.
speed
Updated engine oil temperature digital display
Oil temperature digi-
tal display
Speed warning to --- If the stored speed is exceeded (between
km/h 30 - 250 km/h, or 18 - 155 mph), an audible warning
is given together with a visual warning.
Changing between display modes
● In vehicles without multifunction steering wheel: press the lever.
● Vehicles with a multifunction steering wheel: press
Storing a speed for the speed warning
● Select the display
Speed warning at --- km/h
● Press to store the current speed and switch off the warning.
OK
Safety First
or .
 
.
Operating instructions
● In addition, set the required speed by pressing the rocker switch on the
windscreen wiper lever or buttons
wheel for 5 seconds. Next, press
OK
speed is stored and the warning activated.
● To switch off, press . The stored speed is deleted.
OK
Manually erasing memory 1 or 2
● Select the memory to be erased.
● Press and hold for approximately two seconds.
OK
Personalising the displays
It is possible to select which of the displays in the multifunction display you
wish to see on the instrument panel in the
measurement can also be modified ⇒ p age 67.
Configuration Menu
Configuration
Function
Menu
Multifunction Configuration of the multifunction display data that you
wish to see on the instrument panel display ⇒ p age 66.
display data
Compass Changing the magnetic region and calibration of the com-
pass. To calibrate the compass, please follow the instruc-
tions given on the instrument panel display.
Changing vehicle convenience functions ⇒ p age 68.
Convenience
Lights & visi-
Configuration of vehicle lighting ⇒ p age 69.
bility
Time Changing the hours and minutes of the clock and the navi-
gation system. The time can be set here and the choice
can be made between the 24 hour and 12 hour display.
The S in the upper part of the display indicates that the
clock is set to summer time.
Practical tips
Cockpit
or on the multifunction steering
 
again or wait a few seconds. The
settings menu. The units of
Technical Specifications
67

