Seat ALHAMBRA Owner's Manual page 100

98 Lights and visibility
if the ignition is switched off
Fog lights, dipped beam and

side lights off.
The guidance lights may be

switched on.

Side light on.
Dipped beam off; if necessa-

ry, the side light comes on for
a time.
Fog lights
The warning lamps  or  on the light switch also indicate that the fog
lights are switched on.
● Switching on the fog lights : Turn the switch to position  or pull out
 to the first stop.
● Switching on the rear fog light : turn the light switch to position  o
pull out  to the maximum.
● To switch off the fog lights, press the light switch or turn it to position .
Audible warnings to advise the driver that the lights have not been
switched off
If the key is not in the ignition and the driver's door is open, an audible
warning signal is heard in the following cases: This is a reminder to turn off
the lights.
● When the parking light is on ⇒ p age 96.
● When the light switch is in position .
when the ignition is on
Lights off or daytime driving light
on.
Automatic dipped beam control
or daytime driving light on.
Side light on.
Dipped beam switched on.
WARNING
The side lights or daytime driving lights are not bright enough to illumi-
nate the road ahead and to ensure that other road users are able to see
you.
● Always use your dipped beam head lights if it is raining or if visibility
is poor.
Lights and visibility: functions
Parking light
When the parking light is switched on,(right or left turn signal), the front
side light and the rear light on the corresponding side of the vehicle stay lit.
The parking lights will only work with the ignition off.
Daytime driving light
The daytime driving light consists of individual lights in the front head-
lamps.
When the daytime driving light is switched on, only the individual lights
come on ⇒
.
The daytime lights are switched on each time the ignition is turned on if the
light switch is in position .
When the light switch is in position , a photo sensor automatically turns
the instrument and switch lighting on and off.
Activating the daytime lights
Press and hold the turn signal and
main beam lever upwards and back-
wards (right turn signal and light
flasher).
Switch the ignition on and off for approximately 3 seconds.
Deactivating the daytime lights
Press and hold the turn signal and
main beam lever downwards and
backwards (left turn signal and light
flasher).

