Seat ALHAMBRA Owner's Manual page 126

124 Seats and storage compartments
Removing and fitting the head restraints
All seats are equipped with a head restraint.
Removing the front head restraint
● Push the head restraint up as far as it will go ⇒
restraints on page 123.
● Unlock the head restraint using a flat object such as a plastic card, if re-
quired, sliding it between the upholstery of the head restraint and the head
restraint rod-guide cover
● Pull the head restraint out of the fitting without releasing the button
Fitting the front head restraint
● Insert the head restraint into the guides on the backrest.
● Push the head restraint down as far as it will go while pressing button
.
1
● Adjust the head restraint to the correct position ⇒ p age 123.
Fig. 86 Removing the
Removing the head restraints from the second and third row of seats
front head restraint.
● Fold the backrest of the rear seat forwards ⇒ p age 125.
● Push the head restraint up as far as it will go ⇒
● Pull the head restraint out of the fitting without releasing the button
⇒ f ig. 87
● Fold the backrest of the rear seat backwards until it is engaged.
Installing the head restraints for the second and third row of seats
● Fold the backrest of the rear seat forwards ⇒ p age 125.
● Insert the head restraint into the guides on the backrest.
● Push the head restraint down as far as it will go while pressing button
.
1
● Fold the backrest of the rear seat backwards until it is engaged.
Fig. 87 Removing the ● Adjust the head restraint to the correct position ⇒ p age 123.
rear head restraint.
⇒ f ig. 86
.
2
.
1
in Adjusting the head
.
1
.
