Seat ALHAMBRA Owner's Manual page 202

200 Driving
Optical parking system* (OPS)
The optical parking system is an accessory to the Parking sensor system
⇒ p age 199 and the park assist system ⇒ p age 202.
The zone recorded by the sensors in front of and behind the vehicle is dis-
played on the factory-fitted radio or navigation system screen. Any obsta-
cles are display in relation to the vehicle ⇒
Function
Switching the display
on:
Switching the display
Fig. 142 On-screen OPS
off manually:
display: an obstacle
A
has been detected in the
collision zone. an ob-
B
stacle has been detected
Switching the display
in the segment. zone
C
off manually:
recorded behind the vehi-
cle.
Zones explored
The zone in which obstacles are recognised runs to a distance of around
120 cm from the front of the vehicle and up to 60 cm to the side
⇒ f ig. 143
up to 160 cm and around 60 cm to the sides
Screen display
The image displayed represents the supervised zones in several segments.
As the vehicle moves closer to an obstacle, the segment moves closer to the
vehicle displayed
Fig. 143 On-screen OPS
displayed, this means that the vehicle has reached the collision zone. Stop
display: an obstacle
A
the vehicle!
has been detected in the
segment. zone recor-
B
ded behind the vehicle.
.
Necessary operations
Switch on the parking sensor system ⇒ p age 199
or the park assist system ⇒ p age 202. The OPS
switches on automatically.
Press a zone selection button on the factory-fit-
ted radio or navigation system
OR: Briefly press the function button
on the screen.
Drive forwards at more than about 10-15 km/h.
Select the reverse gear on vehicles with rear as-
sist ⇒ p age 207. The display changes to the im-
age of the camera.
. Behind the vehicle, the zone analysed reaches a distance of
B
⇒ f ig. 142
⇒ f ig. 143
and . When the penultimate segment is
B A
or
RVC

.
C
