Seat ALHAMBRA Owner's Manual page 205

● To ensure that the system works properly, the bumper sensors must be
kept clean, free of ice and snow and uncovered.
● The bumper sensors may become damaged or misaligned, for example,
when parking.
● When cleaning the sensors with high-pressure or steam cleaning equip-
ment, spray the sensors briefly at a distance of no less than 10 cm.
Note
Contact a specialist workshop with any system faults. SEAT recommends
visiting a Technical Service.
Parking using the park assist system
Safety First
Fig. 144 Detailed view of
the centre console: but-
ton to switch the park as-
sist system on manually.
Operating instructions

Fig. 145 Gap detected: Engage the reverse gear to park (parallel or nose/tail to the
kerb).
Preparing to park
● The traction control system ASR (TCS) must be turned on ⇒ p age 183.
● Parallel parking: press the button
When the function is enabled, the button
● Perpendicular parking: press the button
twice. When the function is enabled, the button
● If necessary, press the

● Apply the turn signal indicator for the side on which a gap is to be detec-
ted for parking. The instrument panel displays the side corresponding to the
road.
Practical tips
at speeds up to 50 km/h once.

⇒ f ig. 144
will light up.
at speeds up to 50 km/h

⇒ f ig. 144
will light up.
button once more to change parking mode.
Technical Specifications
Driving 203
