Seat ALHAMBRA Owner's Manual page 130

128 Seats and storage compartments
Folding the seats in the second row of seats for loading
● If necessary, open the belt loop and wind up the seat belt by hand.
● If it is necessary, remove the head rests on the integrated child seats
then reinstalled the integrated child seats ⇒ p age 45.
● If necessary, raise the armrests.
● Remove objects from the footrest area in front of and behind the rear
seat ⇒ .
● Move the rear seat all the way back.
● Push the head restraint down as far as it will go ⇒ p age 10.
● In the middle seat, close the drinks carrier in the rear of the centre con-
sole, if necessary.
⇒ f ig. 89
● Pull lever
1
plete rear seat folds forward ⇒
● Fold the backrest forwards until it locks into the load surface position
.
B
● If necessary, pull on the lever
quired position.
● When the seat is folded down, no adults or children should travel in it
⇒
.
Folding the seats in the third row of seats for loading
● If necessary, open the belt loop and wind up the seat belt by hand.
● Open the tailgate.
● Push the head restraint down as far as it will go ⇒ p age 10.
● Remove objects from the footrest area in front of and behind the rear
seat ⇒ .
● Remove objects from the space below the rear seat.
● Remove the attachment elements and supports for the net from the rail
system.
● Pull lever back and fold the backrest forwards. The rear seat folds for-
1
ward ⇒
and the cushion also moves forward.
back and fold the backrest forwards. The com-
.
⇒ f ig. 90
to move the seat to the re-
2
● Fold the seat tray forward on top of the folded seat.
● When the seat is folded down, no adults or children should travel in it
⇒
.
Putting the seats in the second row back in place
⇒ f ig. 89
● Pull lever upwards and place the backrests in vertical posi-
1
tion. The entire seat folds backwards.
● Pull on the rear seats and the backrest to ensure that they are correctly
locked in place and that the safety belt protection is guaranteed for rear
seat passengers.
Putting the seats in the third row back in place
● Open the tailgate.
⇒ f ig. 90
● Pull on the handle to put the seat tray back in position.
2
● Pull on the handle . The entire seat folds backwards.
3
● Press on the seat tray in the backrest until it is held in position by its
magnets.
● Open the sliding door.
● Put the backrest into position and press firmly until it clicks into place.
● Pull on the rear seats and the backrest to ensure that they are correctly
locked in place and that the safety belt protection is guaranteed for rear
seat passengers.
WARNING
Folding and lifting the rear seats carelessly without paying attention
could cause serious injury.
● Never fold or lift the seats while driving.
● Do no trap or damage seat belts when raising the backrest.
● Keep your hands, fingers, feet and other body parts out of the hinges
and the seat locking mechanism when folding and unfolding.
