To replace the tail light bulbs
Complete operations only in the sequence given.
Removing the tail light units
Complete operations only in the sequence given:
Safety First
Fig. 212 Tail lights on
bodywork: To remove the
lamp holder.
to
1
4
Attachment tab.
Operating instructions
Rear light, left
Always take the checklist into account and take the necessary ac-
1.
2.
Open the storage compartments
3.
on the left-hand side of the lug-
gage compartment ⇒ p age 141.
⇒ f ig. 211
Rotate the cap
4.
in the direction of the arrow and
remove it.
Unscrew the attachment screw
from the on-board tools ⇒ p age 320. The bolt is secured in its posi-
5.
:
Extract the tail light from the bodywork by carefully pulling back-
6.
7.
Pull the red strip on the connector and extract the connector.
8.
Disassemble the tail light unit and place it on a flat, clean surface.
Practical tips
Fig. 211 On the side of the luggage compartment: To
remove the left and right hand side tail lights.
move the cap;
attachment screw.
2
Rear light, right
tions ⇒ p age 327.
Open the tailgate ⇒ p age 84.
Move the 12 V socket support by
pressing gently downwards
⇒ f ig. 211
(arrow).
B
90°
1
⇒ f ig. 211
using the screwdriver
2
tion.
wards.
Technical Specifications
If and when
333
re-
1