Seat ALHAMBRA Owner's Manual page 219

Switching the lane assist system on or off
● Select the corresponding menu option using the button for the driver as-
sist systems ⇒ p age 62.
● ALTERNATIVELY: Activate or deactivate the system in the menu
sub-menu Assist systems , menu
sign" indicates that the driver assist system is switched on.
Automatic deactivation: the lane assist system can be deactivated automat-
ically if there is a system malfunction. Control lamp switches off.
The lane assist system is inactive (control lamp lit in yellow)
● When the speed of travel drops to below approx. 65 km/h (40 mph).
● When the lane assist system does not detect the dividing lines of the
road. For example, in the event of road works, and snow, dirt, moisture or
reflections.
● When the radius of a curve is too small.
● When there is no dividing line.
● When the distance to the next dividing line is excessive.
● When there are more than two lane markings per lane.
● When the TCS is disconnected.
● When the system does not detect any active rotation of the steering
wheel by the driver during a prolonged period.
● Temporarily, in the event of very dynamic driving.
● When the turn signal is connected.
Note
Before starting travel, verify that the camera's field of vision is not covered
⇒ f ig.
152.
Note
Keep the camera window clean.
Safety First
Settings
⇒ p age 62. The "confirmation
Lane Assist
Operating instructions
Disconnect the lane assist system in the following
situations
,
Due to the limits of the lane assist system, disconnect it in the following sit-
uations:
● When more attention is required of the driver
● For very sporty driving
● In very unfavourable weather conditions
● In very unfavourable road conditions
● In areas of road works

Practical tips
Driving

Technical Specifications
217