Seat ALHAMBRA Owner's Manual page 337

Changing the number plate light
1.
Press the flat part of the screwdriver included in the vehicle on-board
2. tools (⇒ f ig.
number plate light
3.
Press on the connector lock in the direction of the arrow
4.
and pull out the connector.
Rotate the lamp holder in the direction of the arrow
5.
extract it with the lamp.
6.
Insert the lamp holder into the number plate light and rotate all the
7.
way in the opposite direction to the arrow
8. Plug the connector into the lamp holder.
Safety First
Fig. 213 On the rear
bumper: number plate
lights.
Fixed number plate light
Always take the checklist into account and take the necessary actions ⇒ p age 327.
198) in the direction of the arrow, in the groove of the
⇒ f ig.
213.
Replace the faulty bulb by a new identical bulb.
⇒ f ig. 214
Operating instructions
Complete operations only in the sequence given:
Unscrew the number plate light screws using the screwdriver from the
on-board tools
Detach the number plate light.
⇒ f ig. 214
Separate the attachment tabs from the rear panel of the number plate
A
light by pressing.
⇒ f ig. 214
and
B
Take the lamp holder out of the number plate light.
Insert the lamp holder into the number plate light.
.
B
Press on the attachment tabs. The lamp holder must be firmly attached
to the number plate light.
Practical tips
Fig. 214 Number plate
light: To remove the lamp
holder.
Bolted number plate light
(⇒ f ig. 198).
Technical Specifications
If and when 335
