Table of Contents
Advertisement
Specifications
1. Power Requirements:
Electrical – 115 VAC, 60 Hz, 3.8 A
The machine is equipped with an 2.4 m [8 ft]
standard neoprene covered power cord and a
grounded plug.
Contact your 3M Representative for power
requirements not listed above.
2. Operating Rate:
Belt speed is 0.29 m/s [57 ft/min]
3. Operating Conditions:
Use in dry, relatively clean environments at 5
o
o
o
IMPORTANT SAFEGUARD
40
C [40
to 105
F] with clean, dry boxes.
Important – Machine should not be washed
down or subjected to conditions causing
moisture condensation on components.
IMPORTANT SAFEGUARD
4. Tape:
IMPORTANT SAFEGUARD
TM
Scotch
brand pressure-sensitive film box
sealing tapes.
5. Tape Width:
36 mm [1.5 in]
6. Tape Roll Diameter:
Up to 405 mm [16 in] maximum on a 76.2 mm
[3 in] diameter core. (Accommodates all system
roll lengths of Scotch
7. Tape Leg Length (Standard):
50 mm ± 6 mm [2 in ±.25 in]
o
to
Tape Leg Length (Optional):
70 mm ± 6 mm [2.75 in ±.25 in]
(To change tape leg to 70 mm [2.75 in], see
"Special Set-Up Procedures", page 28.)
8. Box Board:
Style – regular slotted containers – RSC
Bursting test –125 to 275 P.S.I. single wall or
double wall B or C flute.
(Specifications continued on next page)
7
TM
brand film tapes.)
Advertisement
Table of Contents
