GRAPHTEC FCX4000 Series Setup Manual page 10

Connecting the USB Cable
7
First, make sure that Windows 10 has been launched
successfully.
Next, ensure that the plotter is turned off and then
connect the USB cable supplied with the plotter to your
computer.
(1) Make sure that the power switch is turned off ("
(2) Connect the power cable.
(3) Connect the USB cable.
1 . Connect to your
computer.
" side).
8
Turn on (" | " side) the power switch.
9
Installation of the device starts.
After a while, the printer icon of plotter will be added in
the "Devices and Printers" screen.
* To display the "Devices and Printers" screen, display
the "Control Panel" screen from the Start menu
and then click on the [Devices and Printers] in the
[Hardware and Sound].
This concludes the installation of the driver software.
Next, please install the software applications.
Install the software in accordance with your operating
environment.
10
2. Connect to the
Cutting Plotter.
USB cable
(Accessories)
www.delinit.by