Html Operation - Extron electronics XTP II CrossPoint Series User Manual

HTML Operation

The XTP II CrossPoint Series can be remotely controlled via:
•
•
•
This section introduces using the built-in HTML pages to operate the XTP II CrossPoint
Series, including:
•
•
•
•
•
The matrix switcher can be controlled and operated through its LAN port, connected via a
LAN or WAN, using a Web browser such as the Microsoft Internet Explorer. The display in
the browser of the status or operation of the matrix switcher has the appearance of Web
pages. This chapter describes the factory-installed HTML pages, which are always available
and cannot be erased or overwritten.
NOTE: If your Ethernet connection to the matrix switcher is unstable, try turning off
The XTP System Configuration Software (see the XTP System Configuration Software
Help file, available at www.extron.com)
SIS commands (see SIS Configuration and Control
Built-in HTML pages (see below)
Download the Startup Page
Status Tab
Configuration Tab
File Management Tab
Control Tab
the proxy server in your Web browser. In Microsoft Internet Explorer, click
Internet Options > Connections > LAN Settings
box, and then click
server...
on page 44)
, uncheck the
.
OK
XTP II CrossPoint Series • HTML Operation
Tools >
Use a proxy
66