HBM C16i Series Mounting Instructions page 15

C16i
CAUTION
Grease load introduction
parts and dowel pin
S Fix the lower load introduction parts with a spanning
washer when using EPO3/50t or eccentric washers
when using C16/EPU44A or C16/ZOU44A. For
subsequent sealing of the flexible tube, mount the
tube clip supplied with the load cell around the lower
compression pad.
S Now insert the load cells by rotating them into the
lower load introduction part such that the dowel pin
engages into the rotation stop recess.
A1461-2.0 HBM: public
Mounting
13