GE Mark VIe System Manual page 96

3.7.1.3 SMF Component Sources
The following are typical sources for single-mode fiber-optic cables and connectors.
Fiber-optic Cable:
Optical Cable Corporation
5290 Concourse Drive
Roanoke, VA 24019
Phone: +1-540-265-0690
Part Numbers (from OCC)
Each of these cables are SMF 8.3/125 um Core/Cladding diameter with a numeric aperture of 0.13.
OC041214-01 4 Fiber Zero Halogen Riser Rated Cable.
OC041214-02 4 Fiber Zero Halogen with CST Armor.
OC041214-03 4 Fiber with Flame Retardant Polyurethane.
OC041214-04 4 Fiber with Flame Retardant Polyurethane with CST Armor
Corning Cable Systems
PO Box 489
Hickory, NC 28603-0489
Phone: +1-800-743-2671
Fiber-optic Connectors:
®
3M - Connectors and Installation kit
Thomas and Betts - Connectors and Assembly polishing kit
Amphenol - Connectors and Termination kit
3.7.2 Un-shielded Twisted Pair (UTP) Copper Cables
3.7.2.1 Cat 5e Cables for PDH, UDH, MDH
These copper cables are used for data highways connections from edge switches to HMIs and controllers.
• High-quality, category 5e UTP cable, for 10/100Base-TX Ethernet
• Four pairs of twisted 22 AWG or 24 AWG wire
• Protective plastic jacket
• Impedance: 75 – 165 Ω
• Connector: RJ-45 UTP connector for solid wire
3.7.2.2 Cat 6 Cables for Layer 3 Security Hardware
These copper cables are used for the additional layer 3 security offering, and provide connections from root switches to an
additional series of routers, switches, and firewalls.
• High-quality, category 6 UTP cable, for 10/100Base-TX Ethernet
• Four pairs of twisted 22 AWG or 24 AWG wire
• More stringent specifications for crosstalk and system noise
• Protective plastic jacket
• Connector: RJ-45 UTP connector for solid wire
• Backward compatible with the Category 5/5e cable standards
96 GEH-6721_Vol_I_BP GEH-6721_Vol_I Mark VIe and Mark VIeS Control Systems Volume I
Public Information