Installation Guidelines; Installation Support - GE Mark VIe System Manual

6

Installation Guidelines

This chapter defines installation requirements for the control system. Specific topics include GE installation support, wiring
practices, grounding, typical equipment weights and dimensions, and power dissipation and heat loss.
Warning

6.1 Installation Support

GE's system warranty provisions require both quality installation and that a qualified service engineer be present at the initial
equipment startup. To assist the customer, GE offers both standard and optional installation support. Standard support consists
of documents that define and detail installation requirements. Optional support is typically the advisory services that the
customer may purchase.
6.1.1 Early Planning
To help ensure a fast and accurate exchange of data, a planning meeting with the customer is recommended early in the
project. This meeting should include the customer's project management and construction engineering representatives. It
should accomplish the following:
• Familiarize the customer and construction engineers with the equipment
• Set up a direct communication path between GE and the party making the customer's installation drawings
• Determine a drawing distribution schedule that meets construction and installation needs
• Establish working procedures and lines of communication for drawing distribution
Installation Guidelines
This equipment contains a potential hazard of electric shock or burn. Only personnel
who are adequately trained and thoroughly familiar with the equipment and the
instructions should install, operate, or maintain this equipment.
Public Information
GEH-6721_Vol_I_BP System Guide 127