Replacing Uv Lamp; Photo Catalytic Filter - Surgically Clean Air SCA7000H Operational Manual

Chapter 6
CARE AND MAINTENANCE
Hold the UV LAMP button 2
seconds to reset
After replacing the UV lamps,
hold the UV LAMP button 2
seconds to reset the time for
the UV lamps.
E-16

Replacing UV Lamp

When the " " indicator light on the control panel flashes, it is time to
replace the UV lamps.
Removing the UV lamp
Before removing the UV lamps, open the front panel and take the
Pre-filter, the HPEA filter and the VOC filter first.
6-7 Remove the UV lamp blocker.
WARNING：
• Never look directly at UV lamps.
Direct exposure to germicidal light can cause temporary or chronic
damage to your eyesight, or even blindness.
• Always unplug the unit before cleaning, servicing or replacing the UV
lamps.
• Do not dispose of the UV bulb with normal household waste, hand it in
at an official collection point for recycling.

Photo Catalytic Filter

Photo catalytic filter is permanent, never needs replacing. When there
is dust on it, clean the dust off using a vacuum cleaner dusting brush.
Do not wash it in water
6-8
Hold the UV lamp, pull it up
remove it from UV lamp holder.