BEKA HAMAX System 2 Operating Instructions Manual page 22

Legend
Safety instructions which, if not complied with, may involve a personal hazard are marked
specifically with the general hazard symbol:
GB
This heading is used if inaccurate compliance or non-compliance with the Operating
Instructions or specified work procedures etc. may result in damage:
This expression is used to draw attention to special information:
Warranty and scope of warranty
22
The overall system is covered by a one-year warranty.
Note!
Warranty regarding operational safety, reliability and performance of the lubricating pump is only accepted by the
manufacturer subject to the following conditions:
·
Assembly, connection, setting, maintenance and repair are performed by authorized and specialized staff.
·
The limits stipulated in the technical data must never be exceeded.
·
Only original components or components approved by the manufacturer may be used for repair and maintenance
work.
·
The used lubricant has to correspond with the requirements on page 5.
...a product of BEKA
Inappropriate intervention will rule out your warranty claim!
2
Caution!
Note!