Endress+Hauser Levelflex FMP51 Modbus Technical Information page 78

78
Mounting kit, isolated
Accessory Description
Mounting kit, isolated
can be used for
FMP51
 24
1
2
For reliably insulated fixing of the probe.
Maximum process temperature: 150 °C (300 °F)
For rope probes 4 mm (¹⁄₆ in) or 6 mm (1/4 in) with PA>steel:
• Diameter D = 20 mm (0.8 in)
• Order-No.: 52014249
For rope probes 6 mm (¹⁄₄ in) or 8 mm (1/3 in) with PA>steel:
• Diameter D = 25 mm (1 in)
• Order-No.: 52014250
Due to the risk of electrostatic charge, the insulating sleeve is not suitable for use
in hazardous areas. In these cases the fixing must be reliably grounded.

1
2
Scope of supply of the mounting kit:
Insulating sleeve
Eye-bolt
The mounting kit can also be ordered directly with the device (see the
Levelflex product structure, feature 620 "Accessory Enclosed", option PG
"Mounting kit, isolated, rope").
Levelflex FMP51 Modbus
A0013586
Endress+Hauser