Programming And Selecting; Delivering Hot Water; Cleaning; Cleaning The Machine - DeLonghi ELETTA CAPPUCCINO EVO ECAM46.86X Instructions For Use Manual

17
3. Turn the froth adjustment dial (D1) to "CLEAN" (fig. 17). A
progress bar appears and gradually fills as the operation
proceeds together with "Cleaning underway". Cleaning
stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A10) with a sponge (fig. 18).
Please note:
• If you want to prepare a number of cappuccinos or milk-
based coffees, clean the milk container after you have pre-
pared the last beverage only. In this case, when requested,
press (B2) to go back to the main menu.
• If you do not clean the milk container, the
pears on the display to remind you that it needs cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.

9. PROGRAMMING AND SELECTING

In the " my" menu you can customise the beverages according
to your personal tastes.
1. Press (B3);
2. Press the scroll arrows
required beverage is displayed;
3. Press (B11) to select the beverage;
• Beverages with coffee: "Program aroma" appears on
4.
the display (D5). Press the scroll arrows
until the required aroma is selected. Press
confirm the selection. Preparation begins and "Program
coffee" appears on the display together with a bar which
gradually fills as delivery progresses. When the required
quantity is reached in the cup, press
• Cappuccino and milk-based coffees: after selecting
and confirming the aroma, "Program milk" appears on
the display together with a bar which gradually fills as
milk delivery progresses. When the required quantity is
reached, press
symbol ap-
(B3) or (B10)until the
or
(STOP).
.
The appliance then makes the coffee. Press
terrupt delivery when the required quantity of coffee is
reached.
5. Save the settings by pressing
(B2)) .
6. "Parameters saved" or "Parameters not saved". The appli-
ance is ready for use again.
Please note:
• When the minimum quantity you can set is reached,
"STOP" appears on the display.
• "STOP": press the corresponding button to interrupt milk or
18
coffee delivery and move on to the next delivery (if appli-
cable) to complete the beverage.

10. DELIVERING HOT WATER

Important! Danger of scalding.
Never leave the machine unattended while delivering hot water.
1. Make sure the hot water spout (C6) is attached correctly to
the hot water connection nozzle(A10);
2. Place a container under the water spout (as close as possi-
ble to avoid splashes) (fig. 6);
3. Press
menu by pressing the scroll arrows
(B10) until "Hot water" is displayed;
4. Press
fills as preparation proceeds;
5. The machine delivers hot water, then delivery stops au-
tomatically. To interrupt delivery of hot water manually,
press
Please note:
• If "Energy Saving" mode is active, you may have to wait a few
seconds before the hot water is delivered.
• The quantity of water delivered can be customised (see
section "9. Programming and selecting").

11. CLEANING

11.1 Cleaning the machine

The following parts of the machine must be cleaned regularly:
• the appliance's internal circuit;
• coffee grounds container (A17);
to
• drip tray (A19) and condensate tray (A16);
• water tank (A14);
• coffee spouts (A9);
• pre-ground coffee funnel (A4);
• infuser (A12), accessible after opening the door (A11);
• milk container (D);
• hot water/steam connection nozzle (A10);
• hot water spout (C6).
12
(B10) and scroll through the beverages in the
(B11). A progress bar appears and gradually
(STOP).
to in-
(or press
(B3) or