Menu Settings; Rinsing; Language; Maintenance - DeLonghi ELETTA CAPPUCCINO EVO ECAM46.86X Instructions For Use Manual

1. To turn the appliance off, press the
7).
2. If provided for, the appliance performs a rinse cycle then
goes off (stand-by).
Please note:
If you will not be using the appliance for some time, unplug
from the mains socket:
1. First turn the appliance off by pressing the
(A7) (fig. 7);
2. Disconnect the appliance by unplugging it from the mains
socket.
Important!
Never unplug while the appliance is on.

6. MENU SETTINGS

The menu has 5 items, some divided into subgroups:
•

Rinsing;

•

Language;

•

Maintenance:

- Descale,
- Install filter,
- (if a filter has been in-
stalled): Replace filter,
- (if a filter has been in-
stalled): Remove filter
6.1 Rinsing
Use this function to deliver hot water from the coffee spouts
(A9) and hot water spout (C6), if inserted, to clean and heat the
appliance's internal circuit.
1. Place a container with a minimum capacity of 200ml under
the coffee and hot water spouts (fig. 6);
2. Press (B2) to enter the menu;
3. Press the scroll arrows
required item is displayed;
4. Press (B11): after a few seconds, hot water is deliv-
ered first from the coffee spouts, then from the hot water
spout (if inserted) to clean and heat the appliance's inter-
nal circuit;
5. To stop rinsing, press
automatically.
Please note:
• If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the grounds container (A17)
to contain water.
6.2 Language
To modify the language of the display (D5), proceed as follows:
button (A7) (fig.
button
•

General:

- Set temperature,
- Water hardness,
- Auto-off,
- Energy saving,
- Beep,
- Default beverages,
- Default values;
• Statistics.
(B3) or (B10) until the
or wait for rinsing to stop
1. Press (B2) to enter the menu;
2. Press the scroll arrows
required item is displayed;
3. Press (B11);
4. Press the scroll arrows
required language is displayed;
5. Press (B11): The appliance goes back to the menu;
6. Then press (B2) to exit the menu.
6.3 Maintenance
Here you can find all the maintenance operations required by
the appliance over time:
• Descaling: For instructions on descaling, see section "12.
Descale".
• Install filter/Replace filter/Remove filter: For instruc-
tions on how to install/replace/remove the filter (C4), see
section "14. Water softener filter".
6.4 General
Here you can find the settings to customise the basic functions
of the appliance:
1. Press (B2) to enter the menu;
2. Press the scroll arrows
"General" is displayed;
3. Press (B11) to confirm;
4. Press the scroll arrows
item is displayed:
Set temperature:
To change the temperature of the water used to make the cof-
fee, proceed as follows:
• Press (B11). The current value appears on the dis-
play (D5) and the "New" value flashes;
• Select the new value you want to set using the scroll ar-
rows (B3) or
5. When the required value (low, medium, high) has been
selected, press
The display goes back to the previous screen.
Please note:
Varying the temperature has most effect for long beverages.
Water hardness
For instructions on identifying and setting water hardness, see
section "16. Setting water hardness".
Auto-off (standby):
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours
• Press (B11). The current value appears on the dis-
play (B1) and the "New" value flashes;
• Select the new value you want to set using the scroll ar-
rows (B3) or
• When the required value (15 min, 30 min, 1 hour, 2 or 3
hours) has been selected, press
7
(B3) or (B10) until the
(B3) or (B10) until the
(B3) or (B10) until
or until the required
(B2);
.
(B10);
.