Making Cappuccino And Milk-Based Coffees Automatically; Cleaning The Milk Container After Use; Programming And Selecting - DeLonghi PrimaDonna S Evo ECAM51 55 Series Instructions For Use Manual

Min. froth
Max. froth
10.2 Making cappuccino and milk-based
coffees automatically
1. Fill the milk container (D) and attach it as described above;
2. Select the required beverage:
Directly selected beverages:
• : Cappuccino (B6)
• : Latte Macchiato (B7)
• : Hot milk (B8)
• : Caffelatte (B9)
Selectable by pressing
pressing (B3):
• Flat white
• Cappuccino+
• Cappuccino Mix;
• Espresso macchiato
3. After a few seconds, preparation begins automatically and
the selected beverage appears on the display, together
with a progress bar which gradually fills as preparation
progresses;
4. After delivering the milk, the machine automatically
makes the coffee (if required by the recipe).
Please note:
• (B2): press to completely terminate the preparation
and return to the main screen.
• "STOP" (B5) : press to stop the delivery of milk or
coffee and go to the next stage (if featured) to complete
the beverage.
• At the end of delivery, to increase the quantity of coffee in
the cup, press " EXTRA" -
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
• The beverages can be customised (see sections "8.4 Pro-
gram beverages" and "8.5 Program My beverages").

8.1 Cleaning the milk container after use

Important! Danger of burns
• When cleaning the internal tubes of the milk container (D),
a little hot water and steam leak out of the milk spout (D5).
Avoid contact with splashes of water.
LATTE MACCHIATO /
FLAT WHITE
CAPPUCCINO / CAPPUCCI-
NO+ / CAPPUCCINO MIX
/ ESPRESSO MACCHIATO /
HOT MILK (frothed)
(B4) and confirm by
(B4).
"Set dial to CLEAN, ESC to cancel" flashes on the display (B1)
each time you use a milk function. Clean as described to elimi-
nate all milk residues (or press
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(fig. 19);
3. Turn the froth adjustment dial (D1) to "CLEAN" (fig. 18).
"Cleaning underway" appears on the display, together
with a progress bar which gradually fills as the operation
proceeds. Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A15) with a sponge (fig. 20).
Please note!
• To prepare a number of cappuccinos or milk-based coffees,
clean the milk container after you have prepared the last
beverage only. In this case press
to go back to the main menu.
• If you do not clean the milk container, the
pears on the display to remind you that it needs cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, before cleaning you must wait for the appli-
ance to heat up.
11. "

" PROGRAMMING AND SELECTING

In the you can select beverages customised to your per-
sonal tastes. If the beverages have not yet been programmed,
the appliance will request the customisation procedure before
proceeding with delivery:
Unprogrammed beverages:
1. Press (B5);
2. Press the selection arrows
the desired beverage is displayed between the two dotted
lines;
3. Press (B3) to select the beverage;
4. • Beverages with coffee: the display (B1) shows "Pro-
gram aroma": press the selection arrows
until selecting the desired aroma. Press
to confirm the selection: beverage preparation then
commences and the display shows "Program coffee"
with a progress bar that indicates the quantity deliv-
ered: once the desired quantity has been delivered, press
or
• Cappuccino and milk-based coffees: after having se-
lected and confirmed the aroma, beverage preparation
commences and the display shows "Program milk" with
a progress bar that indicates the quantity of milk deliv-
40
(B2) to clean later):
when requested,
(B4) or
.
symbol ap-
(B5) until
or