Table of Contents
Advertisement
•
"STOP"
(B5) : press to stop the delivery of milk or
coffee and go to the next stage (if featured) to complete
the beverage.
•
At the end of delivery, to increase the quantity of coffee in
the cup, press "
EXTRA" -
•
Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
•
The beverages can be customised (see sections "16.1 Pro-
gram beverages" and "8.1 Program My beverages").
8.1 Cleaning the milk container after use
Important! Danger of burns
•
When cleaning the internal tubes of the milk container (D),
a little hot water and steam leak out of the milk spout (D5).
Avoid contact with splashes of water.
"Set dial to CLEAN, ESC to cancel" flashes on the display (B1)
each time you use a milk function. Clean as described to elimi-
nate all milk residues (or press
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(fig. 19);
3. Turn the froth adjustment dial (D1) to "CLEAN" (fig. 18).
"Cleaning underway" appears on the display, together
with a progress bar which gradually fills as the operation
proceeds. Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A15) with a sponge (fig. 20).
Please note!
•
To prepare a number of cappuccinos or milk-based coffees,
clean the milk container after you have prepared the last
beverage only. In this case press
to go back to the main menu.
•
If you do not clean the milk container, the
pears on the display to remind you that it needs cleaning.
•
The milk container can be kept in the refrigerator.
•
In some cases, before cleaning you must wait for the appli-
ance to heat up.
11. "
" PROGRAMMING AND SELECTING
In the
you can select beverages customised to your per-
sonal tastes. If the beverages have not yet been programmed,
the appliance will request the customisation procedure before
proceeding with delivery:
Unprogrammed beverages:
1. Press
(B5);
(B4).
(B2) to clean later):
when requested,
symbol ap-
17
2. Press the selection arrows
the desired beverage is displayed between the two dotted
lines;
3. Press
(B3) to select the beverage;
4. • Beverages with coffee: the display (B1) shows "Pro-
gram aroma": press the selection arrows
until selecting the desired aroma. Press
to confirm the selection: beverage preparation then
commences and the display shows "Program coffee"
with a progress bar that indicates the quantity deliv-
ered: once the desired quantity has been delivered, press
or
.
• Cappuccino and milk-based coffees: after having se-
lected and confirmed the aroma, beverage preparation
commences and the display shows "Program milk" with
a progress bar that indicates the quantity of milk deliv-
ered: once the desired quantity has been delivered, press
or
.
The appliance then prepares the coffee: press
to stop delivery when the desired quantity of cof-
fee has been delivered.
5. "Save parameters?": to save the settings, press
(otherwise, press
6. "Parameters saved" or "Parameters not saved". The appli-
ance is ready for use again.
Please note!
The display shows "OK
reaches the minimum programmable quantity.
Programmed beverages:
1. Press
(B5);
2. Press the selection arrows
the desired beverage is displayed between the two dotted
lines;
3. Press
(B3) to select;
4. Preparation begins according to the previously pro-
grammed settings.
Please note:
•
"2 My Espresso" can only be selected when "My Espresso"
has already been programmed.
•
"STOP"
(B5) : press to stop the delivery of milk or
coffee and go to the next stage (if featured) to complete
the beverage.
•
At the end of delivery, to increase the quantity of coffee in
the cup, press "
EXTRA" -
12. DELIVERING HOT WATER
Important! Danger of burns.
Never leave the machine unattended while delivering hot water.
(B4) or
(B5) until
or
(B3)) .
" -
(B5) when the length
(B4) or
(B5) until
(B4).
or
or
or
Advertisement
Table of Contents
Troubleshooting
