Table of Contents
Advertisement
6. Press "Deliver" to start delivery;
7. When the desired quantity has been delivered into the cup,
press "Stop".
8. If the drink in the cup is as desired, press "Save" to store
the settings, or "Cancel" to retain the previous parameters.
9. Press "X" to go back to the homepage.
The appliance goes back to the homepage (C).
Please note:
•
If saved, the new settings will be stored ONLY in the se-
lected profile.
•
When customizing a single drink, the corresponding dou-
ble version is customized likewise, automatically, and the
machine displays the message "Settings saved for both
double and single recipe";
•
It is possible to exit programming mode at any given mo-
ment by pressing "X": the values will not be saved.
•
Once the drink has been customized, the settings will
show "Reset" (in the middle of the bottom line) and "my"
(among the quantity selections). Pressing "Reset", the set-
tings for the drink revert to the factory default values.
Drink quantities table
Drink
Standard
quantity
Espresso
40ml
2X Espresso
40 ml + 40 ml
Coffee
180ml
Long
160ml
Doppio+
120ml
Americano
150ml
Hot water
250ml
12. SELECTING YOUR PERSONAL PROFILE
The machine allows multiple profiles to be saved, each one asso-
ciated with a different icon.
The customized drink settings are saved in each profile. The
order in which all the drinks are displayed is based on the fre-
quency of selection.
To select a profile, proceed as follows:
1. From the homepage (C), press the profile currently in use
(C1): the list of selectable profiles will appear;
2. Now select the required profile.
To add a new profile:
1. From the homepage (C), press the profile currently in use
(C1): the list of selectable profiles will appear;
2. Press "+Add" and create the new profile
3. Press "Change" to change the image and colour of the
4. To rename the profile, press on the existing name at the
5. Press "Save".
6. The new profile has been created. Press "X" to go back to
To edit an existing profile:
1. From the homepage (C), press the profile currently in use
2. Press
3. Press "Change" to change the image and colour of the
4. To rename the profile, press on the existing name at the
5. Having made the desired changes, press "Save".
To delete an existing profile:
1. From the homepage (C), press the profile currently in use
Programmable
2. Press
quantity
3. Press "Delete".
20-180 ml
4. Confirm the operation by pressing "Yes".
5. Press "X" to go back to the homepage.
20-180 ml +
Please note:
20-180 ml
Once a selection has been made, the coloured bars of the drink
100-240 ml
settings will all appear in the same colour as the profile;
115-250 ml
13. CLEANING
80-180 ml
13.1 Cleaning the machine
70-480 ml
The following parts of the machine must be cleaned periodically:
20-420 ml
-
-
-
-
-
-
-
-
-
Important!
•
•
15
profile.
bottom of the profile: the keypad will pop up. Type the new
name and press Ok.
the homepage.
(C1): the list of selectable profiles will appear;
on the profile to be edited.
profile.
bottom of the profile: the keypad will pop up. Type the new
name and press Ok.
(C1): the list of selectable profiles will appear;
on the profile to be edited.
internal circuit;
coffee grounds container (A10);
drip tray (A14) and drip tray grille(A12);
water tank (A9);
coffee spout (A16);
removable infuser (A6), accessible after opening the rela-
tive service flap (A5);
pre-ground coffee funnel (A3);
control panel (B).
milk carafe (E)
Do not use solvents, abrasive detergents or alcohol to
clean the machine. With De'Longhi superautomatic coffee
machines, no chemical additives are required for cleaning
purposes.
Do not use metal objects to remove encrustations or coffee
deposits as they could scratch metal or plastic surfaces.
Advertisement
Table of Contents
Troubleshooting
