Table of Contents
Advertisement
10. PREPARING HOT WATER
1. Attach the hot water spout (D5) to the machine (fig. 4);
2. Place a cup under the spout;
Direct selection:
3. On the homepage (C), press directly on the image cor-
responding to hot water: delivery begins, and will stop
automatically.
Customisation of quantity:
3. Press the customisation bar (C8) at the bottom of the
image corresponding to hot water: the display shows the
quantity to be selected;
4. Press"Deliver": delivery begins and will stop automatically.
Please note:
•
To stop delivery manually, press "Stop" or "Cancel".
•
Immediately after delivery has stopped automatically, it
can be prolonged by pressing "Extra".
11. "MY" FUNCTION (hot drinks only)
With the "my" function, you can select the quantity of each in-
gredient used to prepare the hot drink you want to make.
1. Ensure the intended profile (C7) for customisation of the
drink is active;
2. Press the customization bar (C8) at the bottom of the
image corresponding to the desired drink;
3. Press
;
4. Press "Start" and follow the guided procedure;
5. Select the desired intensity, if envisaged for the drink, and
press "Next";
6. Make sure the cup placed under the coffee spout (A16) is
the right size, and press "Deliver" to start dispensing;
7. As the drink is delivered, a progress bar will fill up gradual-
ly. Once the minimum programmable quantity is reached,
the "Stop" button will be enabled. The " " symbol indi-
cates the factory default setting.
8. When the desired quantity has been delivered into the cup,
press "Stop".
9. If the drink in the cup is as desired, press "Save" to store the
new setting in the selected profile, or "Cancel" to retain the
previous parameters.
10. Press "X" to go back to the homepage.
Please note:
•
If saved, the new settings will be stored ONLY in the se-
lected profile.
•
When customising a single drink, the corresponding dou-
ble version is customised likewise, automatically, and the
machine displays the message "Settings saved for both
double and single recipe";
•
It is possible to exit programming mode at any given mo-
ment by pressing "X": the values will not be saved.
•
To disable the function and prepare the drink using other
my
parameters, press the customization bar relative to the
drink: press
my
) and revert to the factory default values.
my
•
To reprogramme the my drink, the parameters must be
my
reset to the factory default values: press the customization
bar of the drink and check that the function is enabled (
). Press "Reset" to restore the factory default
my
values for the drink. The drink can now be reprogrammed.
Drink quantities table
my
Drink
Standard
quantity
Espresso
40ml
2X Espresso
40 ml + 40 ml
Coffee
180ml
Long
160ml
Doppio+
120ml
Americano
150ml
Hot water
250ml
12. SELECTING YOUR PERSONAL PROFILE
The machine allows multiple profiles to be saved, each one asso-
ciated with a different icon.
The customised drink settings are saved in each profile. The
order in which all the drinks are displayed is based on the fre-
quency of selection.
To select a profile, proceed as follows:
1. From the homepage (C), press the profile currently in use
(C1): the list of selectable profiles will appear;
2. Now select the required profile.
To add a new profile:
1. From the homepage (C), press the profile currently in use
(C7): the list of selectable profiles will appear;
2. Press "+Add" and create the new profile
3. Press "Change" to change the image and colour of the
profile;
4. To rename the profile, press on the existing name at the
bottom of the profile: the keypad will pop up. Type the new
name and press Ok.
5. Press "Save".
6. The new profile has been created. Press "X" to go back to
the homepage.
To edit an existing profile:
1. From the homepage (C), press the profile currently in use
(C1): the list of selectable profiles will appear;
15
on the page to disable the function (
Programmable
quantity
20-180 ml
20-180 ml +
20-180 ml
100-240 ml
115-250 ml
80-180 ml
70-480 ml
20-420 ml
Advertisement
Table of Contents
Troubleshooting
