Advertisement

Quick Links

INSTALLATION INSTRUCTIONS
NOTE: (Excludes King Ranch models with appearance package & Platinum models)
PRODUCT SAFETY & LEGAL DISCLAIMER
IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY
CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY.
Review the product package and contents prior to beginning the installation. Take care when
opening the packaging and removing items. If a return is needed you will want to return the product in
its original packaging if possible.
This instruction guide is provided as a GENERAL installation guide, some vehicles vary dimensionally
and may require additional steps.
Test fit the product on the vehicle prior to any third party modifications and or finishing. The
manufacturer and/or distributors do not accept responsibility for third party charges, labor and or
third part replacement modifications. Some modifications may void the factory warranty.
Exercise due-diligence when installing this product. The manufacturer and distributors of this product
do not accept any responsibility for vehicle damage or personal injury resulting from the installation of
this product. Careless installation and operation can result in serious injury or equipment damage.
This product is for general off-road use. All liability for installation and use rests with the
owner/operator.
INSTALLER: Once installation is complete, please return this guide along with other documentation
included in this product back to the consumer for future reference. The manufacturer/distributors of
this product do not guarantee this particular version will be available at a later date.
REV.01
© 2016 Go Rhino Products. All rights reserved
www.gorhino.com
589 W. Apollo St., Brea, CA 92821
PART NO.
28296T
PRODUCT DESCRIPTION:
BR20.5 REAR BUMPER
REPLACEMENT
APPLICATION:
FORD F-150
P: 888 427 4466
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 28296T and is the answer not in the manual?

Questions and answers

Summary of Contents for Go Rhino 28296T

  • Page 1 The manufacturer/distributors of this product do not guarantee this particular version will be available at a later date. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
  • Page 2: Installation Instructions

    • Factory sensors may read shackles or hooks protruding from the fairlead and or tow hooks. • All sensor testing is completed by Go Rhino Products and or third party testing labs on modified vehicles. • Sensor sensitivity, factory sensor housing, orientation, and operating conditions are all variables that will influence functionality of the sensors.
  • Page 3: Tools Needed For Installation

    1/2” Lock washer 1/2” x 1 1/2” Hex head bolt 1/2” Hex nut Go Rhino recommends you, the installer, read this installation instruction manual from front to back before installing the product. You may also click here to view an installation video or visit http://www.gorhino.com/Installation-Videos.
  • Page 4 STEP #4 Disconnect the license plate lights, trailer plug (Photo 4) and If equipped disconnect the backup sensors from the factory bumper wiring harness. Remove the wiring harness from the factory bumper. REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 5 To ease removal, the plastic clips can be popped loose from the underside of the bumper ends, (Photo 5). Photo 5. Driver side. Photo 6. Driver side. REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 6 STEP #3 On each side of the BR20.5 bumper, remove the (2) plastic plugs from the sensor bezel brackets that are preinstalled in the bumper. REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 7 ½” x 1 1/2” hex bolts, (6) ½” flat washers, (6) ½” lock washers, (Photo 1 & 2). Leave the hex bolts loose for final adjustment. Photo 1. Driver side. Photo 2. Driver side. REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 8 Remove the trailer plug from the factory bumper and install it in the replacement bumper shell, and reconnect the wiring harness, (Photo 6). NOTE: Remember to check and retighten all factory and supplied nuts and bolts periodically. Photo 5. Photo 6. REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 9: Limited Warranty

    This warranty covers the cost of the product only and does not include the cost of removal, installation, third party modifications or shipping of the product. In no event shall Go Rhino be liable to buyer or any third party for any damage or harm caused by the product or use thereof, regardless of weather such damages were foreseeable and whether or not Go Rhino has been advised of the possibility of such damages, not withstanding the failure of any agreed or other remedy of its essential purpose.

Table of Contents