Go Rhino 23174B Installation Instructions Manual

PRODUCT SAFETY & LEGAL DISCLAIMER
•
IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO
DO SO MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY.
•
Review the product package and contents prior to beginning the installation. Take care when
opening the packaging and removing items. If a return is needed you will want to return the product
in its original packaging if possible.
•
This instruction guide is provided as a GENERAL installation guide, some vehicles vary
dimensionally and may require additional steps.
•
Test fit the product on the vehicle prior to any third party modifications and or finishing. The
manufacturer and/or distributors do not accept responsibility for third party charges, labor and or
third part replacement modifications. Some modifications may void the factory warranty.
•
Exercise due-diligence when installing this product. The manufacturer and distributors of this product
do not accept any responsibility for vehicle damage or personal injury resulting from the installation of
this product. Careless installation and operation can result in serious injury or equipment damage.
•
This product is for general off-road use. All liability for installation and use rests with the
owner/operator.
•
INSTALLER: Once installation is complete, please return this guide along with other documentation
included in this product back to the consumer for future reference. The manufacturer/distributors of
this product do not guarantee this particular version will be available at a later date.
INJURY HAZARD
Please complete a shop and tool inspection prior to beginning the installation.
•
Always make sure you have a clean, dry and well lit work area.
•
Always remove jewelry, loose fitting clothing and wear protective gloves and eye protection.
•
Always use extreme caution when jacking or raising a vehicle for work. Set the emergency brake
and use tire/wheel blocks and jack stands. Refer to the vehicle manufacturer hand book. Utilize
the vehicle manufacturers designated lifting points.
•
Always use appropriate and adequate care in lifting parts during disassembly and installation.
Seek help in lifting heavy or large items into place. Utilize jacks and or lifting devices when
available.
•
Always insure products are secure during disassembly and installation.
•
Always wear eye protection and take steps to protect any exposed skin during the installations.
Drilling, cutting and grinding plastic and metal may create flying particles that can cause injury.
•
Always use extreme caution when drilling, cutting and or grinding on a vehicle. Thoroughly inspect
the area to be drilled, on both sides of material, prior to modification and relocate any objects that
may become damaged.
•
Always assemble and tighten all fasteners per the installation instructions.
•
Always route electrical cables carefully. Avoid moving parts, parts that may become hot and rough
or sharp edges.
•
Always insulate and protect all exposed wiring and electrical connections.
www.gorhino.com
© 2016 Go Rhino Products. All rights reserved
589 W. Apollo St., Brea, CA 92821 P: 888 427 4466
Page | 1