Advertisement
Quick Links
REV/B
Do not attempt to install this product on any vehicle other than the one it is designed for and listed above!
QTY
PARTS DESCRIPTION
12
5/16" X 1" HEX BOLTS
12
5/16" FLAT WASHERS
12
5/16" LOCK WASHERS
12
5/16" U-NUTS
24
3/8" LOCK WASHERS
24
3/8" x 1 " HEX BOLTS
Step 1. Read the instructions completely before you begin the installation.
If the vehicle is equipped with factory running boards, remove boards and fasteners.
CENTER AND REAR BRACKET MOUNTING HOLES
DOMINATOR SERIES SIDESTEPS
ASSEMBLY & INSTALLATION INSTRUCTIONS
PART NO. D24176 99-08 FORD F-250/350 SUPER CAB
INSTALLATION INSTRUCTIONS
QTY
PARTS DESCRIPTION
48
3/8" FLAT WASHERS
24
3/8" HEX NUTS
6
F99 MOUNTING BRACKETS
1
D24176P PASSENGER SIDESTEP
1
D24176D DRIVER SIDESTEP
FRONT BRACKET MOUNTING HOLES
LOWER BODY PINCH MOLD
1
Advertisement
Related Manuals for Go Rhino Dominator Series
Summary of Contents for Go Rhino Dominator Series
- Page 1 DOMINATOR SERIES SIDESTEPS REV/B ASSEMBLY & INSTALLATION INSTRUCTIONS PART NO. D24176 99-08 FORD F-250/350 SUPER CAB Do not attempt to install this product on any vehicle other than the one it is designed for and listed above! PARTS DESCRIPTION PARTS DESCRIPTION 5/16”...
- Page 2 tep 2. This installation uses three mounting brackets per side. Beginning with the passenger side, locate the six holes in the lower body pinch mold. OPTIONAL INSTALLATION USING THE ADDITIONAL 5/16” FASTENERS F99 MOUNTING BRACKET 3/8” X 1” HEX BOLT WASHER & NUT PASSENGER SIDE LOWER BODY PINCH MOLD Step 3.
- Page 3 F99 MOUNTING BRACKET 3/8” X 1” HEX BOLTS WASHERS & NUTS PASSENGER SIDESTEP Step 4. Position the passenger sidestep up to the mounting brackets and loosely attach it to the brackets using the 3/8” x 1” hex bolts, washers and nuts as shown. Step 5.