Download Print this page
Go Rhino 5934048T Installation Instructions Manual

Go Rhino 5934048T Installation Instructions Manual

Srm400 modular roof rack

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS
PRODUCT SAFETY & LEGAL DISCLAIMER
IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO
MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY.
Review the product package and contents prior to beginning the installation. Take care when
opening the packaging and removing items. If a return is needed you will want to return the product in
its original packaging if possible.
This instruction guide is provided as a GENERAL installation guide, some vehicles vary dimensionally
and may require additional steps.
Test fit the product on the vehicle prior to any third party modifications and or finishing. The
manufacturer and/or distributors do not accept responsibility for third party charges, labor and or
third part replacement modifications. Some modifications may void the factory warranty.
Exercise due-diligence when installing this product. The manufacturer and distributors of this product
do not accept any responsibility for vehicle damage or personal injury resulting from the installation of
this product. Careless installation and operation can result in serious injury or equipment damage.
This product is for general off-road use. All liability for installation and use rests with the
owner/operator.
INSTALLER: Once installation is complete, please return this guide along with other documentation
included in this product back to the consumer for future reference. The manufacturer/distributors of
this product do not guarantee this particular version will be available at a later date.
REV.01
© 2016 Go Rhino Products. All rights reserved
www.gorhino.com
589 W. Apollo St., Brea, CA 92821
PART NO.
• 5934048T
• 5934058T
• 5934068T
PRODUCT DESCRIPTION:
• SRM400 MODULAR ROOF RACK
P: 888 427 4466
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 5934048T and is the answer not in the manual?

Questions and answers

Summary of Contents for Go Rhino 5934048T

  • Page 1 The manufacturer/distributors of this product do not guarantee this particular version will be available at a later date. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
  • Page 2: Installation Instructions

    Installation of some of these products may alter the factory sensor system performance. • Factory sensors may read shackles or hooks protruding from the fairlead and or tow hooks. • All sensor testing is completed by Go Rhino Products and or third party testing labs on modified • vehicles. •...
  • Page 3 1/4” x 1 ¼” Hex Bolt SM400-06 Adhesive Backed Foam Tape 5934068T Go Rhino recommends you, the installer, read this installation instruction manual from front to back before installing the product. You may also click here to view an installation video or visit http://www.gorhino.com/Installation-Videos.
  • Page 4 Side Rail & Crossbar Cap Bracket Side Rail & Crossbar Cap Assembly (Driver) Bracket Assembly (Passenger) Crossbar Rear cover Front Cover Rear Base Front Base Clamp Bracket Strap Bracket 5934068T 5934048T Shown © 2016 Go Rhino Products. All rights reserved REV.01...
  • Page 5 INSTALLATION INSTRUCTIONS Step-1 Lay the SRM roof rack components on a protective surface, (Fig 1). If necessary, use the packing materials to protect the finish on the components. Fig 1 5934048T Shown REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 6 If using the OEM roof rack crossbars and the supplied clamp brackets for attachment of the SRM roof rack to the vehicle Step-2b Measure the width of the OEM roof rack crossbars, (Fig 2b). Fig 2b REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 7 ¼” hex nuts in the crossbar. Snug but do not tighten the screws, (Fig 3). Repeat Step 2 and 3 to assemble and attach the rear base to a crossbar. Fig 3 REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 8 Step-4 Lay the assembled front base and crossbar, assembled rear base and crossbar, and the remaining crossbars in position on a flat protective surface as shown, then place the side rails alongside the crossbars, (Fig 4). Fig 4 5934048T Shown REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 9 (Fig 5, 6 & 7). Fig 5 Crossbar Cap Bracket Fig 6 Fig 7 5934048T Shown REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 10 Step-7 Remove the paper backing and apply a strip of foam tape to the face of the front base as shown, (Fig 8 & 9). Repeat Step 6 and 7 to attach the side rails to the rear base, and apply the foam tape. 5934048T Shown Fig 8 Fig 9 REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 11 (6) ¼” x ¾” button head screws and ¼” plastic flat washers, (Fig 10 & 11). Snug but do not tighten the screws. Repeat to attach the rear cover to the side rails to the rear base. Fig 10 5934048T Shown Fig 11 REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 12 5934048T Shown Fig 12 Fig 13 REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 13 INSTALLATION INSTRUCTIONS Step-10 Adjust and align the SRM roof rack assembly as necessary and fully tighten all hardware. Fig 14 5934048T Shown REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 14 ¾” hex bolts, (2) ¼” flat washers, (2) ¼” lock washers and (2) ¼” hex nuts for each clamp bracket, (Fig 16). Snug but do not tighten the hex nuts. Fig 15 5934048T Shown Fig 16 REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 15 (2) ¼” x 1 ¼‘” hex bolts, (2) ¼” lock washers and (2) ¼” flat washers, (Fig 17 & 18). Align the SRM rack assembly as necessary and fully tighten all hardware. Fig 17 Fig 18 REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Page 16: Limited Warranty

    This warranty covers the cost of the product only and does not include the cost of removal, installation, third party modifications or shipping of the product. In no event shall Go Rhino be liable to buyer or any third party for any damage or harm caused by the product or use thereof, regardless of weather such damages were foreseeable and whether or not Go Rhino has been advised of the possibility of such damages, not withstanding the failure of any agreed or other remedy of its essential purpose.

This manual is also suitable for:

5934058t5934068t