Horizon Fitness COMFORT 2.0 Owner's Manual page 8

RECUMBENT BIKE ASSEMBLY
Comfort
R8.0
NUT (D)
SPRING
WASHER (C)
FLAT WASHER (B)
BOLT (A)
8
MAIN FRAME
REAR STABILIZER
FRONT STABILIZER
STEP 1
HARDWARE FOR STEP 1
BOLT (A)
M8 X 56 MM
QTY: 4
SPRING WASHER (C)
M8 X 2.0T MM
QTY: 4
A Open HARDWARE FOR STEP 1.
B Attach the REAR STABILIZER to the MAIN
FRAME using 2 BOLTS (A), 2 FLAT WASHERS
(B), 2 SPRING WASHERS (C) and 2 NUTS (D).
C Attach the FRONT STABILIZER to the MAIN
FRAME using 2 BOLTS (A), 2 FLAT WASHERS
(B), 2 SPRING WASHERS (C) and 2 NUTS (D).
Note: Lifting up the machine will help your assembly.
First put in place the stabilizer and then insert the bolts
will also make your assembly easier.
FLAT WASHER (B)
Φ9X Φ18 X 2.0T MM
QTY: 4
NUT (D)
M8
QTY: 4