Horizon Fitness COMFORT 2.0 Owner's Manual page 21

UPRIGHT BIKE ASSEMBLY
MAIN FRAME
COMFORT 2.0 SHOWN
STEP 4
CONSOLE MAST
CONSOLE MAST
GROMMET
POSITIONING NOTCH
CONSOLE CABLES
NUT (H)
FLAT WASHER (B)
BOLT (E)
M8 X 60 MM
QTY: 4
BOLT (G)
M8 X 15 MM
QTY: 2
A Open HARDWARE FOR STEP 4.
B Slide CONSOLE MAST GROMMET from the
bottom up the CONSOLE MAST with the small
POSITIONING NOTCH facing forward.
C Attach CONSOLE CABLES and carefully tuck all
cables into MAIN FRAME. Slide CONSOLE MAST
into MAIN FRAME.
BOLT (G)
D Attach the CONSOLE MAST using 2 BOLTS
(G) from the sides and 4 BOLTS (E), 4 FLAT
WASHERS (B), 4 NUTS (H).
BOLT (E)
E Slide CONSOLE MAST GROMMET down over
MAIN FRAME.
HARDWARE FOR STEP 4
FLAT WASHER (B)
Φ9 XΦΦ20 X 2.0T MM
QTY: 4
NUT (H)
M8
QTY: 4
Comfort
Upright
Bike
21