Table of Contents
Advertisement
7
PROGRAMMING THE BOILER
- Position the system's master switch to the "on" position.
If necessary, the interface automatically goes to the clock menu. On the
main screen the icons
,
sec ON, 0.5 sec OFF.
To set the time and day follow the following instructions:
set the hour with the
and
set the minutes with the
set the day of the week with the
time and day setting. The clock blinks for 4sec and then returns to the
main screen
press
.
accessing the SETTING menu at the TIME parameter, or by pressing the
A+C keys for at least 2sec.
+
A
Each time that the boiler is powered a vent cycle is carried out lasting 4 min.
Set the boiler to OFF by pressing
,
and
and
and
arrows. The segment of
Enter
+
C
RESET
MENU
.
8
FIRST COMMISSIONING
- Position the system's master switch to the "on" position.
-
With power on the backlight comes on, then all the icons and the
displayed for 3sec:
A
Then the interface displays the status active at that moment.
A
Vent cycle
b
Each time that the boiler is powered, an automatic vent cycle is
carried out lasting 4 min. When the air purging cycle is in progress, all
heat requests are inhibited except those for domestic hot water when
the boiler is not set to OFF and a scrolling message is displayed on
The purge cycle can be interrupted early by keeping key 2 pressed for at
The purge cycle can also be interrupted, if the boiler is not set to OFF, by a
domestic hot water request.
Adjust the ambient temperature thermostat to the desired temperature
(~20°C) or, if the system is equipped with a programmable thermostat
or timer, ensure that the thermostat or timer is "active" and set correctly
(~20°C)
operation desired.
The boiler will start up and continue working until the set temperatures
are reached, after which it will then go back to standby.
8.1
Operating status
key 1 until the icon for the desired function is displayed.
WINTER MODE
domestic hot water icon and the heating icon are displayed.
ENGLISH
.
33
Hide quick links:
Advertisement
Table of Contents
