Riello Residence KIS Series Installer And User Manual page 32

RESIDENCE
Structure of the MENU tree of the REC10
Indicates the pressure at an OT device
Indicates the pressure at a WIFI device
Indicates the pressure of an outdoor temperature sensor
Indicates the activation of special domestic hot water functions or the presence of a system for managing the
solar thermal array
Indicates the connection to a heat pump (not used on this model)
Icon that lights up when there is an alarm
It comes on when there is a fault together with the icon
Reset
It comes on when there are alarms that require a manual reset by the operator
Enter
When the icon is active, it indicates that the "back/cancel" function of button B is active
When the icon is active, it is possible to navigate the menu or raise the value of the selected parameter
When the icon is active, it is possible to navigate the menu or lower the value of the selected parameter
The icon comes on if central heating is active, it blinks if a heating request is in progress
The icon comes on if domestic hot water is active, it blinks if a domestic hot water request is in progress
They indicate the set point level set (1 notch minimum value, 4 notches maximum value)
Indicates the days of the week
When the "central heating programming timing" function is enabled this icon indicates that the system heating
AUTO ON
When the "central heating programming timing" function is enabled this icon indicates that the system heating
MAN ON
with the programming timing, but it is always active)
MAN OFF This icon indicates when the "central heating programming timing" is not enabled
32
A is active