Riello Residence KIS Series Installer And User Manual page 35

8.4 Adjusting the domestic hot water temperature
On the main screen, pressing the key A rather than B displays the current
domestic hot water setpoint, the value blinks with a frequency of 0.5 sec
ON, 0.5 sec OFF and the icons
+
A
B
The successive pressing of the keys A or B allows you to set the value
of the domestic hot water setpoint raising or lowering the value within the
preset range in steps of 0.5°C.
The level bars beside the heating icon show the setpoint value set with
respect to the operating range:
Safety stop
If there are ignition faults or boiler operation malfunctions, carry out a
is also displayed, which blinks with a frequency of 0.5sec ON and 0.5sec
OFF.
The backlight blinks for 1min after which it switches off, while the icon
continues blinking.
On the 4 digits a message scrolls containing the error code and its
description .
8.6 Reset function
If the release attempts do not restart the boiler, contact your local Technical
.
Assistance Centre
and come on.
+
RESET MENU
DAY
DAY
RESET
8.7 "Domestic hot water comfort" function
Pressing the keys A+B for at least 2sec gives you access to the domestic
hot water comfort functions.
come on:
, you can scroll through the options in sequence
key activates the desired function and you exit the menu
returning to the initial screen.
A scrolling message appears on the display with the following mode:
Function
COMFORT STANDARD
function of the boiler activates. This function keeps the water in the
domestic hot water exchanger hot, to reduce standby times when a request
is made. When the preheating function is enabled the scrolling message
The function is not active when the boiler is OFF.
water immediately ready, it is possible to preheat the domestic hot water
just a few moments before taking it.
allows you, by opening and closing the tap, to start the instantaneous pre-
heating that prepare the hot water only for that water take.
DAY
RESET
,
Scrolling message
-
ENGLISH
, and
35