Riello Residence KIS Series Installer And User Manual page 26

RESIDENCE
Boiler faults list
ERROR
CODE
E010
E011
E020
E030
E040
E041
E042
E060
E070
E077
E080
E090
E091
--
--
--
--
List of combustion faults
ERROR
FAULT
CODE
E021 ion alarm
E022 ion alarm
E023 ion alarm
E024 ion alarm
E067 ion alarm
E088 ion alarm
E097 ion alarm
E085 incomplete combustion
E094 incomplete combustion
E095 incomplete combustion
E058 mains voltage fault
E065 current modulation alarm
E086
26
FAULT
limit thermostat
fan fault
water transducer – load system
water transducer – load system
water pressure transducer fault
domestic hot water probe fault
main zone water thermostat
return line probe fault
return line probe overtemperature
outlet/return line probe differential alarm
clean primary heat exchanger
water pressure low check system
water pressure high check system
boiler board communication lost
played and is followed by post-purging for 45 seconds at the fan's maximum speed.
It is not possible to release the alarm before the end of the post-purging unless the boiler's power supply is
displayed and is followed by a post-purging of 5 minutes at the fan's maximum speed.
It is not possible to release the alarm before the end of the post-purging unless the boiler's power supply is
These are temporary faults that restrict the ignition cycle.
Temporary fault signalled during pre-purging. Post-purging is maintained for 5 min at maximum fan speed.
DESCRIPTION OF ALARM TYPE
switched off.
switched off.
DESCRIPTION OF
ALARM TYPE
transitional
transitional
transitional
transitional
transitional
transitional
transitional
transitional
transitional
transitional
transitional
transitional
-