Assembly - Exerpeutic Triple SureLock Inversion Table Owner's Manual

ASSEMBLY

Facing
each other
Tools:
13, 17mm Wrench
2PCS
Step 1
Note: The parts are labeled with R and L decals to indicate the left and right sides. The left and
right side are labeled as if you are on the inversion table.
1A. Connecting the Front & Rear Posts:
Attach the Left & Right Front Post (3) & (2) onto the Left & Right Rear Post (7) & (6) with two
Hex Bolts (48), two Flat Washers (59), and two Nylon Nuts (61). Simultaneously tighten the
hardware with the two 13, 17mm Wrenches provided.
Hardware:
(48) Hex Bolt
(61) Nylon Nut
(59) Flat Washers
2 PCS
2 PCS
2 PCS
10