Table of Contents
Advertisement
Step 1
Setting Up the Frame:
1A.
Stand the frame up by
as
possible. Then insert the Safety Pin (26) into the hole on the right side of the frame to lock the
Front and Rear Frames (9, 8) together.
1B. Attach the two Rubber Pads (36) onto the Cross beam of the Front Frame (9).
ASSEMBLY
This product weighs more than 44lbs/20kgs and should
be assembled and moved by two or more people.
pulling the Front and Rear Frames (9, 8) as far apart from each other
Hardware:
(26) Safety Pin 1PC
10
Advertisement
Table of Contents
