Exerpeutic Triple SureLock Inversion Table Owner's Manual page 25

HEADREST ADJUSTMENTS
There are 2 installation options for the head rest. Choose the position that fits you best. Use the
included 6mm Allen Wrench to adjust the hardware.
ADJUSTING THE BOOM
The Adjustable Boom (15) can be moved to a variety of different positions in order to
accommodate the height of the person using the inversion table.
To adjust the Adjustable Boom (15):
1. Pull out and hold the Adjustable Boom Knob (11).
2. Slide the Adjustable Boom (15) up or down until the desired height is just visible below
the Backrest Frame (10) tube.
3. When the Adjustable Boom (15) is in the desired position, release the Adjustable Boom
Knob (11) and slide the Adjustable Boom (15) slightly up or down until the Adjustable
Boom Knob (11) locks into place with a "POP" sound.
4. Make sure the Adjustable Boom (15) is correctly locked before use. See Fig. E.
WARNING: Make sure the Adjustable Boom Knob (11) is inserted all the way through the
Backrest Frame (10) before getting onto the inversion table. See Fig. E,
OPERATION AND ADJUSTMENTS
23
6mm Allen
Wrench
1PC
11 11
Fig. E