ASSEMBLY
Tool:
Wrench 13-15mm
1PC
Front Stabilizer (31)
Transport Wheels
Step 1
Frames
Extent Front Frame (1) and Rear Frame (2) apart. When pin holes are
aligned, insert Safety Pin (22) to lock the frames.
Stabilizers
Attach the Front Stabilizer (31) with transport wheels onto Front Frame (1).
Use Wrench 13-15 to tighten all Hexagon Nut Caps (29) and Curve Washers
(30). Attach the Rear Stabilizer (3) onto Rear Frame (2). Use Wrench 13-15
to tighten all Hexagon Nut Caps (29) and Curve Washers (30).
Hardware:
(22) Safety Pin
(29)
(30)
Hexagon Nut Cap
Curve Washer
1 PC
4PCS
Ø8.2xØ22.2
M8
4 PCS
9